Menu
Contact
Basket |

Categories

 

Useful Links

Oil-Tanks-UK
Bunded oil tanks for domestic use and industrial
www.oil-tanks-uk.co.uk

Rapidplumbing
Plumbing related products and industrial products
www.rapidplumbing.co.uk

Ecosure
Enviromental products and infomation
www.ecosure.co.uk

 






Boiler Shop  >  Hot Water Cylinders  >  Heatrae Sadia  >  Heatrae Sadia Megaflo HE (Indirect)


Heatrae Sadia Megaflo CL 70 L HE

Heatrae Sadia Megaflo CL 70 L HE  Ref: 177700
Capacity - 70
High - 809mm
Wide - 530mm
Weight Empty - 25kg
Weight Full - 125kg

Coil Rating - 5.2kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £583.98 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 125 L HE

Heatrae Sadia Megaflo CL 125 L HE  Ref: 177701
Capacity - 125
High - 1115mm
Wide - 530mm
Weight Empty - 31kg
Weight Full - 180kg

Coil Rating - 11.8kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £666.23 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 145 L HE

Heatrae Sadia Megaflo CL 145 L HE  Ref: 177702
Capacity - 145
High - 1241mm
Wide - 530mm
Weight Empty - 34kg
Weight Full - 203kg

Coil Rating - 12.5kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £743.78 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 170 L HE

Heatrae Sadia Megaflo CL 170 L HE  Ref: 177703
Capacity - 170
High - 1398mm
Wide - 530mm
Weight Empty - 39kg
Weight Full - 233kg

Coil Rating - 14.5kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £800.18 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 210 L HE

Heatrae Sadia Megaflo CL 210 L HE  Ref: 177704
Capacity - 210
High - 1499mm
Wide - 530mm
Weight Empty - 47kg
Weight Full - 258kg

Coil Rating - 16.9kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £936.48 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 250 L HE

Heatrae Sadia Megaflo CL 250 L HE  Ref: 177705
Capacity - 250
High - 1751mm
Wide - 530mm
Weight Empty - 54kg
Weight Full - 305kg

Coil Rating - 17.4kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £997.58 (Excluding: VAT at 20%)


Heatrae Sadia Megaflo CL 300 L HE

Heatrae Sadia Megaflo CL 300 L HE  Ref: 177706
Capacity - 300
High - 2065mm
Wide - 530mm
Weight Empty - 64kg
Weight Full - 364kg

Coil Rating - 18.9kW

Element Rating @ 240v - 1 x 3kW
 


Price:   £1,109.20 (Excluding: VAT at 20%)


Installation Details Connections:
Must be installed by a competent installer in accordance with Local Regulations.

England and Wales - Building Regulations G3,

Scotland - Technical Standards P3,

N. Ireland - Building Regulations P5.


Cold Water Control:

22mm HiFlo cold water combination valve assembly comprising 3 bar pressure reducer, ¼ turn isolating ball valve, line strainer, non-return valve and 8 bar expansion valve.

Cold water control valve (3 bar) is supplied for use with mains pressure of 20 bar to 1.5 bar, at the lower pressure, performance will be reduced accordingly. Normal working pressure is 3 bar.


Compatible Boilers:

Gas or oil fired – sealed system or open vent type, fitted with integral control thermostat.


Electrical:

Connection is direct to terminals in the immersion heater which must be permanently connected to the supply through a double-pole linked isolating switch with a minimum breaking capacity of 13A.

On indirect models, controls should be wired to the boiler, programmer etc. in accordance with the control scheme being used. All electrical installation must conform to the latest IEE Wiring Regulations.


Fixing:

Floor standing only.


Flow Rates:

Up to 72 litres per minute depending on adequate supply conditions.


Minimum Water Supply Reqmnts:

20 litres per minute flow and 1.5 bar pressure. (At lesser values, the unit will operate but outlet flow rates may be unacceptable, especially with multiple draw-offs.)

Please contact our Specification Advice Team to discuss specific site conditions if the above minimum requirement cannot be met. Tel: 0871 200 2082


Plumbing:

Inlet/outlet: Use 22mm compression fittings or ¾" bsp male.

Indirect coil: Use 22mm compression fittings or ¾" bsp male.

½" T&P relief valve 15mm compression outlet.


Pressure Testing:

To 15 bar and batch testing to 30 bar.


Secondary Circulation:

Via 22 x 22 x 15mm swept tee (not supplied, available as accessory 95:970:509) Fitted to inlet pipework (circulating pump not supplied).


Tundish:

15mm inlet and 22mm compression outlet.


WaterExpansion:

Via air gap built into the top of the cylinder. The patented floating baffle helps maintain the air gap.